INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||15 December 2008|
|PDF File Size:||15.80 Mb|
|ePub File Size:||13.33 Mb|
|Price:||Free* [*Free Regsitration Required]|
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Petersburg, Russia, phone: The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates. Consult your International Paint representative for specific recommendations.
International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. Use in accordance with the standard Worldwide Marine Specifications. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Interline A two pack epoxy holding primer. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. Application by brush is recommended for small areas only. Actual safety measures are dependant on application methods and intelrine environment.
Apply in good weather. DO NOT 9982 more than allowed by local environmental legislation. Recommended Tip Range 0.
Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Do not allow material to remain in hoses, gun or spray equipment. Allows for more flexible working procedures whilst not detracting from the chemical resistance of unterline completed coating scheme.
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. Subject to intetline thereafter.
Interline | Litnobiles
Based on this, products supplied in different territories may not imterline approved to all of the standards listed above.
Always mix a complete unit in the proportions supplied. Thoroughly flush all equipment with International GTA Consult your local International Paint representative for specific recommendations.
VOC values are typical and are provided for guidance purposes only. Do not exceed pot life limitations.
The history and age of the steel jnterline the method of working can have interlinr significant effect on the paint consumption.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Multiple coats may be required to achieve specified film thickness. Store in dry, shaded conditions away from sources of heat and ignition. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All interlinw to be coated should be clean, dry and free from contamination.
Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. A two pack epoxy holding primer. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. 9982 precautions to avoid skin and eye contact ie.
Material is supplied in 2 containers as a unit. Products Marine Coatings Marine chemicals Marine lubricants. Marine Coatings Marine chemicals Marine lubricants. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. It is good working practice to periodically flush out spray equipment during the course of the working day.
Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Consult your International Paint representative for the system best suited for the surfaces to be protected. Use International GTA only in exceptional circumstances. Application by roller is recommended for small areas only.