D/DM – 17e1 Standard Test Method for Failure in Sewn Seams of Woven Fabrics, seam efficiency, seam slippage, sewn seam, sewn seam strength. ASTM D is a test method used in seam engineering to determine sewn seam strength in woven fabrics. ASTM D Failure in Sewn Seams of Woven Apparal Fabric http://wenku. 1 of 28/11/
|Published (Last):||3 January 2010|
|PDF File Size:||17.75 Mb|
|ePub File Size:||15.51 Mb|
|Price:||Free* [*Free Regsitration Required]|
Size Metric 90 [0. When the failure results in displacement of yarns, the textile product will need to be replaced.
When the performance of a woven textile structure requires data to indicate the maximum seam strength that will result in the failure of fabric on either side of seam, the standard seam can be changed to use the Lapped seam type construction with two or more rows of stitching: It is the responsibility of the user of this xstm to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Link to Active This link will always route to the current Active version of the standard. Likewise, there are other textile structures, intended to be used multiple times, while also being subjected to various care and maintenance regimens.
It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. D163 test requires specialized grip jaws inserts.
It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. As a minimum, the two parties should take a group of test specimens from the same lot of fabric awtm be evaluated, which utilize a like seam assembly or standard seam assembly. Competent statistical assistance is recommended for the investigation of bias. The back jaw must be at least 1×2″.
Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard. Sewn seams in woven fabrics can fail due to rupture, slippage, or any combination thereof.
Combining values from the two systems may result in non-conformance with the standard. Rupture can be further categorized as failure or fabric, or sewing thread, or seam slippage. Size Metric [0. The breaking force of the seam and fabric will permit estimation of seam efficiency.
The front of the grip jaw is to be 1×1″ or If a determination cannot be made as to which seam is the best suited for a particular fabric, all should be evaluated. Note 2—This test method is used in conjunction with Test Method Dwhich is used to measure breaking force and elongation of textile fabrics. Historical Version s – view previous versions of standard.
The seam strength is divided by the ultimate strength in order to give a percentage. Note 1—The grab test procedure in Test Method D shall be used to determine any characteristic in fabric that can affect the measurement of sewn seam strength. Combining values from the two systems may result in non-conformance with the standard.
ASTM D1683 Fabric Seam Strength Testing
Active view current version of standard. This ASTM test requires Vise Grips to be used, however in some rare cases, wrap grips can also be used however this should be noted on the test.
Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard. The values stated in each system may not be exact equivalents; therefore, each system d16883 be used independently of the other. Because sewn seam strength and sewn seam efficiency varies with each aatm, both of the standard seam assemblies, noted in Table 1should be used when comparing the seam strength of different fabrics.
ASTM D / DM – 17e1 Standard Test Method for Failure in Sewn Seams of Woven Fabrics
Seam strength is a comparison test between an unseamed test piece of fabric and the seamed fabric specimen. The analysis for seam astk or seam efficiency is calculated by dividing the seam strength by the ultimate tensile strength of the base material without a seam. This test method can be used as an aid for estimating seam astj for any given fabric. Pneumatic Grips are a great way to speed up testing by reducing the time it asttm to mount the samples in between test lots.
Seams are used to stitch two different pieces of fabric together. These four seam engineering variables contribute to a textile product being able to achieve the maximum sewn seam strength performance and structural integrity when cut pieces of fabric are joined together.